400L Split Pressure Color Steel Solar Hot Water Storage Tanks With Doube Copper Coil

The Split pressure solar water heater is a split system, where the collector is from the storage tank. It is flexible assembly, combined with building perfectly. The system consist o storage tank, solar collector and working stations.

Two heat exchanger models can be used for houses which have been already equipped with other energy sources(e.g.gas,boiler etc). When he weather is cloudy or raining for a period of time, the water can be heated by upper heat exchanger sourced by other energy. All the storage tanks should be tested as tested pressure of 1.2(12 bar) and the working pressure is 0.6MPa(6bar).the daily efficiency is over or equal to 55%.

400L Split Pressure Color Steel Solar Hot Water Storage Tanks With Doube Copper Coil working principle

1. The collector absorbs solar energy and transmits it to the water tank through circulation
2. When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically
3. The circulation pump makes heat-conducting liquid circulate automatically
4. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank.
5. When the temperature difference between solar collector and tank doesn't reach the set value, the circulation pump will be shut automatically
6. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically

Descripition :

1. Inner Tank:SUS304-2B food grade stainless steel

2. Outer Tank:color steel/stainless steel/PVDF

3. Coil material : copper coil /stainless steel/flexible stainless steel

4. Insulation: polyurethane foam

5.Tank Capacity more than 500L is available

6. The whole system is mainly combined by pressurized collector, pressurized storage tank, solar working stations, controller.
7. Pressure: 6 Bar
8. Daily efficiency: ≥ 55% (≥ 42% in winter)
9. Heat preservation: 72h - 80h
10. Electric heater: 1.5Kw-3Kw
11. Heat Pipe: Anti-freezing > -35 ° C

 

Applications:

Domestic hot water for shower, washing. Solar Thermal, Project: such as School, Hospital, Hotel.

Competitive Advantage:

1) use heat pipe for the heat conduction and can get a high heat absorption efficiency and rapid heat transfer.

2) The pipeline is made of red copper and conducted by heat transfer medium liquid; the crust uses aluminium alloy mould material of high strength with airflow design

3) Good anti-frozen performance, it can still work under the environment of -30°C

4) Match with intelligence controller and assistant electrical heater, the system can hot water to you anytime.

5) The insulating layer ruses polyurethane bulk bubble and has a good effect of temperature preservation